Universal Antirock Kit 45 Inch Bar W/20 Inch Steel Arms Bent For TJ/LJ Rear Application Currie Enterprises

Currie now offers Antirock sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45 inch torsion bar length and 20 inch long steel arms that are bent for use in a Jeep TJ Wrangler or LJ Unlimited rear application. Vertical links use a 14 inch long 1/2 inch x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 inch x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are sUpplied. Also sUpplied is the universal weld-in 1.75 inch x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to sUpport the bar in the tube. The 45 inch bar is a .800 inch diameter. These kits require fabricating for installation - these are NOT bolt-on kits.
Details:

• 45 Inch x .800 Inch Torsion Bar
• 43 Inch Mounting Tube
• Powdercoated 20 Inch Bent Steel Arms
• 14 Inch Long 1/2 Inch x 20 RH/LH Rod For Vertical Lengths
• 1/2 Inch x 20 Heim Joint Rod Ends, Jam Nuts, Weld-On Tabs
• 1.75 Inch x .095 Inch Wall DOM Tube And Delron Bushings
• Zinc Plated Hardware
• These Are Not Bolt In Kits - Require Fabrication To Install