Heatshield Products - Exhaust heat shield kit 1/4 thk fits 4 inch diameter pipes x 1 ft. Heatshield Armor Pipe Kits are pre-cut and ready to install, they stop up to 70 percent of heat.
Heatshield Armor Pipe Kits install in minutes. No more handling itchy wrap coiling around a pipe in multiple passes. Simply wrap the shield around the pipe and attach the included wire to the capstan fasteners and you are done.
Heatshield Armor Pipe kits are a game changer in the industry. These heat wrap shields install in minutes. No more handling itchy wrap coiling around a pipe in multiple passes. Simply wrap the shield around the pipe and attach the included wire to the capstan fasteners and you are done.
Heatshield Armor stops so much more radiant heat than a traditional exhaust wrap, we have them sized to allow the proper gap on the exhaust pipe. This makes it warranty compliant with most OEM and aftermarket manufactures.
This pipe heat shield is also customizable. The aluminum can be painted with any high-temperature engine or exhaust paint before it is installed on the pipe. These shields can also be trimmed to any desired length. Use a heavy-duty pair of scissors, measure twice and cut ones. To achieve the OEM finish, use a box cutter to trim back 1/4 inch of the insulation and fold the foil over on the edge.
Unlike OEM and aftermarket heat shields that use stand offs to create a gap, the Heatshield Armor Pipe Kits seal directly onto the exhaust. This prevents heat from up and around the shield to your floorboard. It also retains more heat in the exhaust system, which creates better scavenging and performance.
Stop more heat with a simpler installation. You will never go back to wrapping pipes ever again.
- Armor Pipe Kit 4 in pipes x 1 ft Heatshield Armor Pipe Kits stop more heat than wraps and install in minutes
- Continuous operating temperature of 1800F, 2200F intermittent
- Reduces radiant heat up to 70 percent 0.003 inch thick armor layers, can be cleaned after installation
- Simple installation, install in minutes!
- Tie wire Product can be placed in direct contact with heat source.
- Bio-Soluble Silica 1800F 2200F
- Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product.
- Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
- 1/4 thk x 12 in x 1 ft
