Brake System 13 Inch Front Track4 85-87 GM Y Body BAER Brakes

This front system features the T4 4-piston caliper mounted to a 13 inch 1-piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T. compliant dust and weather seals. Machined hubs will come pre-assembled with quality bearings, studs and packed with Redline Synthetic grease.
Fitment:

• Designed To Be Used With 1985-1987 GM C4 Y-Body Spindles And Hubs

Why Purchase the Track4?

• Baers most popular system, designed for 17 inch and larger wheels.
• Only available with a 13 inch 1pc rotor that is directional
• The Track4 is designed as a front only, as is best suited with our SS4 rear
• Uses the same pad as the 1998-2002 Camaro P/N D0749 for easy, cost effective, pad replacement
• Everything needed including hoses and fittings
• Systems that include hubs will have a set of 6061-T6 billet machined hubs with quality bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.
• In some cases where this will not bolt directly to the factory spindles Baer will supply modified spindles, and the brakes will come complete, pre-assembled, on the spindles, ready to hang.

The T4 Caliper Features:

• 4-Piston radial mount caliper
• 2-piece forged caliper design with six cross bolts for added strength
• Internal crossover design
• Stainless steel pistons, abutments and noise suppression springs
• Staggered piston sizes to minimize pad wear
• Dual seals - dust/weather and pressure - to meet D.O.T. specifications
• Machined logo that is hand painted
• Black Powder Coat Finish - Stock Colors are Red, Black, and Silver - Custom colors available
• Uses correct banjo style fitting - Baer does not use any pipe thread fittings
• No Track Width Change Compared To Stock
• 100 percent MADE IN USA with US sourced material